Flying Whale H06-4 Epoxy Zinc-rich Antirust Paint

With epoxy resin and polyamide resin as the base material, zinc powder as the anti-rust pigment two-component epoxy zinc-rich anti-rust paint, paint film has excellent durability and rust resistance, paint film toughness has good impact resistance, wear resistance, oil resistance and water resistance, and has a cathodic protection effect.

Industrial protective paint field:
It is used for the surface of industrial structural parts with high anti-corrosion performance requirements, and is suitable for high-performance anti-rust primer for large bridges, port machinery, heavy equipment, petroleum refining plants, power plants, various steel structure equipment and facilities, etc.

Note: 1. The above data are for reference only. The actual drying time and the length of the re-coating interval depend on the film thickness, ventilation, humidity, lower paint and mechanical strength, etc.

2. The surface of the paint film before recoating must be clean and dry, free of pulverization and other pollutants. If necessary, the surface before recoating should be fully napped.

The substrate temperature shall be at least 3 ℃ higher than the air dew point, and the relative humidity shall be lower than 85%. The measurement of temperature and humidity should be carried out at the substrate near the operation point. When the construction is not in an open space, good ventilation must be provided to ensure the normal drying of the paint film.

NEW STEEL: Blast cleaned to class Sa2.5 or hand sanded to class St3.

Steel coated with shop primer: secondary derusting shall be carried out to Grade St3.

Painted surfaces shall be clean, dry and intact on a compatible primer.

For more scope of use, please consult Flying Whale New Material Company.

Before using this product, please pay attention to the safety label on the packaging container, refer to and follow the information and precautions related to health and safety in the product safety technical manual of flying whale new material company. During the construction and drying of the product, appropriate ventilation and preventive measures must be adopted to control the solvent concentration within the safety limit to prevent poisoning or hypoxia. Take measures to avoid skin and eye contact with the product. If contact occurs, wash it immediately with suitable detergent, soap and water. If splashed into eyes, rinse with water and seek medical treatment immediately.

Store in a cool, dry, ventilated and dedicated warehouse away from heat sources. Under normal temperature conditions, the storage period is 12 months, and then it needs to be used after passing the inspection.

The surface of zinc-rich primer is easy to form zinc salt (that is, basic zinc carbonate, commonly known as "white powder") when exposed to outdoor for a long time, so it should not be exposed for a long time before coating the post-coating. If a longer coating interval is required, it is recommended to apply epoxy micaceous iron intermediate paint as a closed coating as soon as possible to reduce the workload of secondary rust removal.

The above information and data of this product are accumulated according to our test and actual use experience, which can be used as a construction guide. For the construction carried out without our knowledge, we only guarantee the quality of the paint itself and are not responsible for any product performance problems arising from other aspects. We have the right to modify this manual according to the continuous improvement of the product.

Film thickness and coating rate