Flying Whale Polysiloxane Paint 918

Two-component ultra-high performance, no isocyanate, high volume solid content of polysiloxane decorative finish, the paint film has excellent weather resistance, light and color retention, good decoration, tough paint film has good impact resistance, abrasion resistance and splash and spill pollution of a variety of chemicals have good resistance.

Industrial protective paint field:
It is used for the surface of industrial structural parts with high requirements for weather resistance and decorative performance, and is suitable for harsh marine such as marine engineering and industrial heavy corrosion protection such as chemical facilities, bridges and other steel structures, petroleum refining plants, power plants, concrete The surface of various equipment and facilities such as bridges.

Note: 1. The above data are for reference only. The actual drying time and recoating interval depend on the thickness of the paint film, ventilation, humidity, lower paint and mechanical strength.

2. The surface of the paint film before recoating must be clean and dry, free of pulverization and other pollutants. If necessary, the surface before recoating should be fully napped.

The substrate temperature shall be at least 3 ℃ higher than the air dew point, and the relative humidity shall be lower than 85%. The measurement of temperature and humidity should be carried out at the substrate near the operation point. When the construction is not in an open space, good ventilation must be provided to ensure the normal drying of the paint film.

All surfaces to be coated shall be clean, dry and free of contaminants and shall be evaluated and treated as ISO8504. Painted surfaces shall be clean, dry and intact on a compatible primer.

For more scope of use, please consult Flying Whale New Material Company.

Before using this product, please pay attention to the safety label on the packaging container, refer to and follow the information and precautions related to health and safety in the product safety technical manual of flying whale new material company. During the construction and drying of the product, appropriate ventilation and preventive measures must be adopted to control the solvent concentration within the safety limit to prevent poisoning or hypoxia. Take measures to avoid skin and eye contact with the product. If contact occurs, wash it immediately with suitable detergent, soap and water. If splashed into eyes, rinse with water and seek medical treatment immediately.

Store in a cool, dry, ventilated and dedicated warehouse away from heat sources. Under normal temperature conditions, the storage period is 12 months, and then it needs to be used after passing the inspection.

Component B is very easy to react with water vapor, etc. The packaging barrel of the remaining component B after the paint is mixed must be tightly covered to avoid damage caused by moisture and cementation.

This product will not be fully cured below 10 ℃. In order to achieve the best performance, the curing environment temperature should be higher than 10 ℃.
 

The above information and data of this product are accumulated according to our test and actual use experience, which can be used as a construction guide. For the construction carried out without our knowledge, we only guarantee the quality of the paint itself and are not responsible for any product performance problems arising from other aspects. We have the right to modify this manual according to the continuous improvement of the product.